Virtual Link B1 for supported Audi, Bentley, Lamborghini, Porsche, and Volkswagen air suspension
Virtual Link B1 is a plug-in controller for vehicles with factory air suspension. It connects inline with the factory wiring, you connect to it from your phone, and you set the ride heights you actually want. Save them as presets, then switch between them with the drive modes you already use.
Run the car lower for daily driving, raise it for rough roads and steep driveways, air it out for a show, or return it to stock behavior at any time. The install is fully reversible: no cutting, no splicing, no ECU changes, and nothing left behind when you remove it.
Fitment
Requires factory air suspension on:
- 2019–2026 Audi A8 / S8
- 2017–2026 Audi Q7 / SQ7
- 2019–2026 Audi Q8, 2020–2026 Audi SQ8, 2020–2026 Audi RS Q8
- 2020–2023 Audi e-tron / e-tron S / e-tron Sportback / e-tron S Sportback
- 2024–2026 Audi Q8 e-tron / SQ8 e-tron / Q8 Sportback e-tron / SQ8 Sportback e-tron
- 2018–2026 Audi Q5 / SQ5 / Q5 Sportback / SQ5 Sportback
- 2019–2026 Audi A6 / A7 / A6 allroad
- 2020–2026 Audi S6 / S7 / RS6 / RS7
- 2017–2025 Bentley Bentayga / Bentayga EWB
- 2018–2026 Lamborghini Urus
- 2019–2023 Porsche Cayenne
- 2018–2026 Volkswagen Touareg
Check your vehicle in the finder before ordering.
What it does
- Phone control over Wi-Fi. Connect directly to Virtual Link and adjust everything in its web app. No account and no internet connection needed.
- Live front and rear adjustment. Slide the front and rear up or down in real time, up to 200 mm above or below stock, or as far as your car’s suspension accepts.
- Unlimited presets. Save as many named heights as you like, such as Street, Low, Show, and Lift, and rename them as your setup changes.
- Factory drive modes. Link a preset to each factory drive mode, so the car moves to your height when you change modes. For example, run Street 30 mm below stock in Comfort and a raised preset in Auto for a steep driveway.
- Override any time. Let Virtual Link follow your drive modes, or pick any preset in any mode whenever you need it.
- Calibration. Set each corner once so the car sits level and Virtual Link knows its true starting point.
- Adjustable limits. Set your own minimum and maximum heights so the car never goes somewhere it shouldn’t.
- Updates. Firmware updates are installed through the app and keep features and compatibility current.
- Works with common modifications. Keep OEM or aftermarket lowering links and ride-height sensors, and typical wheel, tire, shock, and air bag upgrades. There is nothing to undo.
Living with it
- Most days you just use your normal drive-mode controls. Once your presets are set, Virtual Link keeps working with your phone disconnected.
- Height readings and changes update in real time, so you can see exactly what the car is doing.
- The interface is simple and easy to read, even in a parking lot.
- Unplug it and the car goes straight back to stock behavior.
Installation
B1 installation is 3 hours book time. No cutting, splicing, or soldering, and no coding.
- Raise the car safely and remove the underbody trays needed to reach the ride-height sensors.
- Unplug the factory connectors at the four ride-height sensors and click the Virtual Link harness in between.
- Route the harness along the underbody and make the trunk connections.
- Mount the module, refit the trays, and lower the car.
- Connect from your phone and follow the calibration steps.
Read the installation guide for your vehicle before starting. To return to stock, unplug Virtual Link and reconnect the original connectors. Lowering links, coding, and other changes you have made stay as they are.
In the box
- 1 × Virtual Link B1 control module
- 1 × plug-in harness with factory-style connectors
You don’t need any other parts to install it.
Shipping, warranty, and support
- Built to order. About 1 week is normal, and we will email you about any changes.
- Free Ground shipping to the contiguous US.
- One-year limited warranty. We replace products that fail because of a manufacturing defect. See the warranty terms.
- Returns: see our Refund Policy.
- Software: Software & Updates.
- Questions or feature ideas: Contact support. Owner feedback shapes future updates.
Virtual Link is designed, built, and supported by the same small team, so when you need help you are talking to people who know the hardware and the software.
At a glance
| Fits | Audi A6, A7, A8, Q5, Q7, Q8, e-tron, S and RS models; Bentley Bentayga; Lamborghini Urus; Porsche Cayenne; Volkswagen Touareg, with factory air suspension (full list above) |
|---|---|
| Control | Phone web app over Wi-Fi. No account or internet connection needed |
| Adjustment | Up to 200 mm above or below stock, front and rear |
| Presets | Unlimited, linked to your factory drive modes |
| Install | 3 hours book time. Plug-in at the four ride-height sensors, no cutting or coding |
| Warranty | One-year limited warranty |
| Shipping | Built to order in about 1 week. Free Ground shipping to the contiguous US |
| In the box | Control module and plug-in harness |
Notes
- You may see occasional white dashboard messages while setting up or making large height changes. If a yellow or red message appears, switch back to a normal preset or remove the module and contact us.
- If a warning persists, go back to a normal preset or remove the module and contact us.
- Very low show heights may not be legal on public roads. Check your local rules.
- Not affiliated with Audi AG, Volkswagen Group, Bentley, Lamborghini, or Porsche. Model names are used only to describe fitment.
- Buying and using Virtual Link means you accept our Terms of Sale. Use assumes proper installation and responsible operation by the owner.
